Cleaning The Filter Canister - Polaris 9350 Owner's Manual

Page 16
and hold for 3 to 5 seconds to
3. Press
delete programming for the selected day.
Press to exit.
T o C a nc e l A ll P r o gr a m s:
1. Press to make sure you have exited
the Programming Menu.
2. Press and hold
programming in the control unit.
The display will turn off for one (1) second.
When all programs are cancelled, the current
day and time is displayed on the screen with
no days of the week lit.
to delete all
S e c t io n 6 . C le a ning a nd
M a int e na nc e
W A R N I N G
To avoid electric shock and other hazards which
could result in permanent injury or death, disconnect
(unplug) the cleaner from the power source before
performing any cleaning and maintenance.
6 . 1 C le a ning t he F ilt e r C a nist e r
The filter canister should be cleaned at the end of each
cycle.
1. Make sure the control unit cable is disconnected
from the electrical outlet or the floating cable
has been disconnected from the control unit.
2. Remove the cleaner from the water and let
the remaining water drain by maintaining the
cleaner in the vertical position.
3. Set the unit on its wheels.
4. To remove the filter canister assembly from the
cleaner, follow steps 5 through 8.
5. Push the cover lock (1) and lift the cover (2)
until it is secured in the vertical position.
(Figure 24).
1
2
F igu r e 2 4 . L if t C le a ne r C o v e r
6. Remove the filter canister assembly from the
body (3), as shown in Figure 25.