Connecting The Control Unit To The Caddy - Polaris 9350 Owner's Manual

8. Align cleaner hook pins with the top holes in
the handle tube and snap into place (Figure 7).
F igu r e 7 . S na p C le a ne r H o o k int o P la c e
9.
( 9 5 5 0 S p o r t / P 9 5 5 )
control holder and align it with the recepticle
on the handle of the caddy to attach the remote
control unit to caddy (Figure 8).
F igu r e 8 . S na p R e m o t e C o nt r o l H o ld e r int o P la c e
Locate pin on the remote
F igu r e 9 . F u lly A sse m b le d T r a nsp o r t C a d d y
3 . 3 C o nne c t ing t he C o nt r o l U nit t o t he
C a d d y
1. Align the bottom of the control unit with the
notch at bottom of the control unit hook on the
caddy (Figure 10).
F igu r e 1 0 . A lign C o nt r o l U nit w it h C a d d y H o o k
2. Press control unit onto the caddy hook until it
snaps and locks into position (Figure 11).
Page 7