3
Figure 25. Remove Filter Canister Assembly
7.
Push the quick release button on the canister
assembly (4) and pull open the filter assembly
(5), as shown in Figure 26.
Figure 26. Open Filter Canister Assembly
8.
Separate the filter canister from the filter
support (6), as shown in Figure 27.
Figure 27. Remove Filter Canister
9.
Empty all debris from the filter canister, then
rinse the canister, the filter support, and the
cleaner under water or using a hose, as shown
in Figure 28.
Figure 28. Wash Filter Canister
6.2.
Cord Tangling
iMPORTANT
Cleaner power cable may become tangled if correct
procedure is not followed after each cleaning cycle.
Tangling of the power cable can occur more frequently
when operating the cleaner on the automatic timer
7-Day Programmed Cycle (9400/P94 and 9500/P95).
Do not leave the cleaner unattended for prolonged
periods and follow the procedure below to avoid
excessive tangling.
Page 17
7