Section 6. Cleaning And Maintenance; Cleaning The Filter Canister - Polaris 9350 Sport Owner's Manual

Page 16
and hold for 3 to 5 seconds to
3. Press
delete programming for the selected day.
Press to exit.
To Cancel All Programs:
1. Press to make sure you have exited
the Programming Menu.
2. Press and hold
programming in the control unit.
The display will turn off for one (1) second.
When all programs are cancelled, the current
day and time is displayed on the screen with
no days of the week lit.
to delete all
Section 6. Cleaning and
Maintenance
WARNiNg
To avoid electric shock and other hazards which
could result in permanent injury or death, disconnect
(unplug) the cleaner from the power source before
performing any cleaning and maintenance.
6.1

Cleaning the Filter Canister

The ilter canister should be cleaned at the end of each
cycle.
1. Make sure the control unit cable is disconnected
from the electrical outlet or the loating cable
has been disconnected from the control unit.
2. Remove the cleaner from the water and let
the remaining water drain by maintaining the
cleaner in the vertical position.
3. Set the unit on its wheels.
4. To remove the ilter canister assembly from the
cleaner, follow steps 5 through 8.
5. Push the cover lock (1) and lift the cover (2)
until it is secured in the vertical position.
(Figure 24).
1
2
Figure 24. Lift Cleaner Cover
6. Remove the ilter canister assembly from the
body (3), as shown in Figure 25.