Empty The Filter Canister - Polaris Spabot ES37 Series Owner's Manual

3. Set the cleaner on its back to
accelerate water drainage.

Empty the Filter Canister

Empty the filter canister after every
cleaning cycle.
1. Press the lid release latch and
remove the lid.
Release
Latch
2. Press the filter cover release to
remove the filter canister.
Spabot Cordless, Battery-Powered Spa Cleaner
™
3. Empty debris and rinse the filter
canister with fresh water. Reattach
canister to the lid.
NOTE: Fine debris can impact the canister
filtration and cleaner performance
over time. Periodically, clean
thoroughly with soapy water and a
soft bristle brush.
4. To reattach the lid, insert the tab on
the lid into the slot on the body (a),
then rotate the lid down to close
the latch (b).
a
Lid
Tab
5. Allow the cleaner to dry fully before
reconnecting it to the charger.
b
9