Samsung MWR-TH00 Installation Manual page 31

Canceling the indoor unit RMC assigned
with the Wired Remote Controller
1 Set SW5 of DS02 switch on the wired remote
controller PCB to 'ON'.
2 Press the button and
wired remote controller simultaneously for more than
5 seconds.
3 Wired remote controller LCD displays as shown in
the picture and changes to the 'Indoor unit group
ADDRESS setting mode'.
button in front of the
Wired remote controller PCB
SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
DS01 DS02
Wired remote controller LCD
Group ADDRESS
(RMC) display
Indoor unit Main ADDRESS display
31
E-