Safety Precautions - Samsung MWR-TH00 Installation Manual

Safety Precautions

This installation manual indicates you to install the wired remote controller
which is connected to the indoor unit. For installation of other optional
accessories, see an appropriate installation manual.
WARNING
CAUTION
2
E-
Read carefully this installation manual before
installation and check whether the remote controller
is installed correctly after installation.
Do not attempt to install or repair this wired remote
controller by yourself.
This remote controller contains no user-serviceable
parts. Always consult authorized service personnel
for repairs.
When moving, consult authorized service personnel
for disconnection and installation of the remote
controller.
Ensure that the wall is strong enough to support the
weight of the remote controller.
Must install the remote controller with rated power
supply.
The remote controller must be installed according to
the national electrical rules by an installation specialist.
When you want to disuse the remote controller,
consult authorized installation center.
Do not use inflammable gases near the remote
controller.
Do not install the remote controller in a location where
it will come into contact with the combustible gases,
machine oil, sulphide gas, etc.
Avoid a location where acid/alkali solution or special
spray is used.
Choose a location that is dry and sunny, but not
exposed to direct sunlight. Available temperature is
between 0°C and 39°C.
Do not spill water into the wired remote controller.
Do not give tensile strength to the cable to avoid
disconnection.
Do not press buttons with a pointed thing.
Do not connect the power cable to the control terminal.
If the remote controller is installed in a hospital or other
special places, it should not affect other electronic
devices.