Before First Use - Breville SHM2 Manual

using your mixer on the stand

Before first use

Make sure your mixer is switched off and unplugged from the mains supply
socket before cleaning, detaching or fitting it to the mixer stand or before fitting or
removing the beaters or dough hooks.
Before using your mixer for the first time, wash the beaters, dough hooks, spatula and
stainless steel bowl in warm, soapy water. Rinse and dry thoroughly. Do not use harsh
abrasives, chemicals or oven cleaners. Using a damp cloth or sponge, wipe the exterior
of the hand mixer and mixer stand. Dry thoroughly.
Using
Always avoid contact with moving parts while the appliance is in operation.
Keep hands, hair, clothing as well as other utensils away from the beaters/dough
hooks during operation.
Never attempt to remove or replace the beaters/dough hooks whilst your food
mixer is in operation, or plugged in to the mains supply.
Never attempt to make pastry with the mixer on the stand. For best results, remove
the mixer and use by hand.
1. Ensure that your mixer is unplugged from the supply socket and the speed selector
is set to 0 (off). Press the mixer head lock release button and raise the mixer stand
head until it clicks.
2. Position the lower rim of the stainless steel mixing bowl over the mixing bowl
turntable.
3. Rotate the mixing bowl in a clockwise direction until it clicks into position.
4. Connect the hand mixer to the mixer stand by locate the two prongs on the stand
into the two rectangular holes in the heel of the hand mixer. Press the hand mixer
down until it clicks into place. Ensure that the hand mixer and mixer stand are firmly
connected together.
5. Insert one of the beaters into one of the recesses and push it firmly into place. Insert
the remaining beater into its recess pushing it firmly into place. When correctly fitted,
both beaters should be locked in place.
To use the dough hooks, insert the dough hook with the red collar into the red recess.
Insert the other dough hook into the remaining recess. Don't use the dough hooks
any other way round.
6. Press the mixer head lock release button and lower the mixer head into the bowl until
the head clicks. Never plug in or switch on your stand mixer before the mixer head
has been lowered into the mixing bowl.
7. Add the ingredients to the mixing bowl.
8. Plug your mixer into the mains supply socket.
9. Turn the on/off speed selector switch to 1 to start mixing. Adjust the speed as
required (see Mixing speeds on page 8). Use the bowl speed control to select the
appropriate bowl speed.
6