Removing A Pump - KitchenAid KUDD03DT Series Technical Education

REMOVING A PUMP

Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Unplug dishwasher or disconnect power.
2. Turn off the water supply to the dishwasher.
3. Remove the tub (see "Removing The
Tub," page 4-6).
4. Remove the four bottom cover screws and
remove the cover.
Bottom Cover Screws
5. Remove the two screws holding the pump
to the tub (see the top right photo).
6. Loosen the two hose clamp screws, pull
the hoses off, and remove the pump.
WARNING
Electrical Shock Hazard
Clamp Screws
7. Remove the wiring connector from the
pump.
4-7
Pump Screws
Wiring Connector