ECS K7AMA User Manual page 30

OnBoard Serial
Use these items to enable or disable the onboard
Port1/2 COM1/2 serial port, and to assign a port address.
OnBoard Ir Port,
Use this item to enable or disable the Infrared
IR items
port, and to assign a port address. If you select a
specific address, the resources are assigned to
the IR port, and you can use the five items below
to determine the operation of the IR port
Onboard Parallel
Use this item to enable or disable the onboard
LPT1 parallel port, and to assign a port address.
Port
The Auto setting will detect and available address.
Parallel Port Mode
Use this item to set the parallel port mode. You
can select SPP (Standard Parallel Port), ECP
(Extended Capabilities Port), EPP (Enhanced
Parallel Port), or ECP + EPP.
EPP Version
Use this item to determine the EPP version, if
you have set the Parallel Port Mode to EPP
Parallel Port IRQ
Use this item to assign either IRQ 5 or 7 to the
parallel port.
Parallel Port DMA
Use this item to assign a DMA channel to the
parallel port. The options are 0, 1 and 3.
Onboard IDE
Use this item to enable or disable either or both of
the onboard Primary and Secondary IDE
channels.
Ultra DMA Support
Use this item to set Ultra DMA for IDE devices on
the IDE channels. You must enable this or UDMA
devices will not work at their intended speed.
Onboard AC'97
This item enables or disables the onboard AC'97
Audio
audio chip.
Onboard AC'97
This item enables or disables the onboard AC'97
Modem
modem chip.
Onboard USB
Enable this item if you plan to use the USB ports
on this mainboard.
Function
USB Function for
Enable this item if you plan to use the USB ports
on this mainboard in a DOS environment.
DOS
28