ECS K7AMA User Manual page 21

Wake On LAN (WOL)
If you have installed a LAN adapter expansion card, connect the
card to the Wake On LAN connector WOL1. This allows
incoming traffic to resume the system from a software power down.
You need to enable this feature in the BIOS setup utility.
WOL1
Header
WOM1
Header
Wake On Modem
If you have installed a fax/modem card, connect the fax/modem to
the Wake On Modem connector WOM1. You can then use the
setup utility to program your computer to resume from a power
saving mode whenever there is an incoming call to the fax/modem.
19