ECS K7AMA User Manual page 36

2. Browse CD
The Browse CD button is the standard Windows command that
allows you to open Windows Explorer and show the contents of
the support CD.
Before installing the software from Windows Explorer, look for a
file named README.TXT, INSTALL.TXT or something similar.
This file may contain important information to help you install the
software correctly.
Some software is installed in separate folders for d ifferent operating
systems, such as DOS, WIN NT, or WIN98/95. Always go to the
correct folder for the kind of OS you are using.
To install the software, execute a file named SETUP.EXE or
INSTALL.EXE by double-clicking the file and then following the
instructions on the screen.
3. Exit
The Exit button closes the Auto Setup window.
Note: The following screens are examples only. The screens
and driver lists will be different according to the mainboard
you are installing.
Mainboard ID
The mainboard identification is located in the upper left-hand
corner. Click the Next button to run Auto Setup program.
34