National Instruments Motion Control 7334 User Manual page 62

Index
Numbers
+5 V signal. See Host +5 V signal.
7344/7334 controllers. See also functional
overview; hardware.
configuration, 2-1
features, 1-1
installation, 2-1 to 2-3
National Instruments application
software, 1-3
optional equipment, 1-4
overview, 1-1 to 1-2
requirements for getting started, 1-2 to 1-3
software programming choices, 1-3
A
analog feedback, 4-2
Analog Input <1..4> signal
analog input voltage ranges (table), 5-12
description (table), 5-3
internal ADC channels (table), 5-12
purpose and use, 5-12
Analog Input Ground signal
description (table), 5-3
purpose and use, 5-13
analog inputs
signal descriptions, 5-12 to 5-13
wiring concerns, 5-13
Analog Output <1..4> signal
description (table), 5-3
purpose and use, 5-4
Analog Output Ground signal
description (table), 5-3
purpose and use, 5-4
Analog Reference signal
description (table), 5-3
purpose and use, 5-13
© National Instruments Corporation
axes
overview, 4-3 to 4-4
servo axis resources (figure), 4-3
stepper axis resources (figure), 4-4
Axis<1..4> Dir (CCW) signal
compatibility with third-party drives, 5-5
description (table), 5-3
purpose and use, 5-5
Axis<1..4> Encoder Index signal
description (table), 5-3
purpose and use, 5-8
Axis<1..4> Encoder Phase A signal
description (table), 5-3
purpose and use, 5-7
Axis<1..4> Encoder Phase B signal
description (table), 5-3
purpose and use, 5-7
Axis<1..4> Forward Limit Switch signal
description (table), 5-3
purpose and use, 5-5 to 5-6
Axis<1..4> Home Switch signal
description (table), 5-3
purpose and use, 5-5 to 5-6
Axis<1..4> Inhibit signal
description (table), 5-3
purpose and use, 5-5
Axis<1..4> Reverse Limit Switch signal
description (table), 5-3
purpose and use, 5-5 to 5-6
Axis<1..4> Step (CW) signal
compatibility with third-party drives, 5-4
description (table), 5-3
purpose and use, 5-4
I-1 7344/7334 Hardware User Manual