Electromagnetic Compatibility - National Instruments NI USB-9219 User Manual

Environmental

Electromagnetic Compatibility

Note For EMC compliance, operate this device with shielded cabling.
CE Compliance
Note Refer to the Declaration of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC for this product, visit
certification
in the Certification column.
© National Instruments Corporation
The USB-9219 is intended for indoor use only but may be used outdoors if
installed in a suitable enclosure.
Operating temperature
(IEC 60068-2-1, IEC 60068-2-2)........... 0 to 60 °C
Storage temperature
(IEC 60068-2-1, IEC 60068-2-2)........... –40 to 85 °C
Ingress protection ................................... IP 40
Operating humidity
(IEC 60068-2-56) ................................... 10 to 90% RH, noncondensing
Storage humidity
(IEC 60068-2-56) ................................... 5 to 95% RH, noncondensing
Maximum altitude .................................. 2,000 m
Pollution Degree (IEC 60664) ............... 2
This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement, control,
and laboratory use:
• EN 61326 EMC requirements; Industrial Immunity
• EN 55011 Emissions; Group 1, Class A
• CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
, search by model number or product line, and click the appropriate link
23 NI USB-9219 User Guide and Specifications
ni.com/