Table of Contents
Advertisement
Network Call Transfer
Screened Transfer
Description
Using the Screened Transfer feature, you can contact a third party and
announce the call before the transfer.
Operation
To use Screened Transfer when your system is set for Onhook
Transfer:
1. Press the HOLD key to place the call on hold.
2. Dial the extension number to which the call is to be transferred.
3. When your call is answered, inform the third party of the transfer.
4. Hang up the handset.
To use Screened Transfer when Onhook Transfer is disabled:
1. Press the HOLD key to place the outside call on hold.
Page 112
• The line LED for the outside line on hold flashes green.
• The phone issues intercom dial tone.
• "Hold TRK #XX" (where "XX" is the line number) appears on the
display.
• If the third party is on the same DBS, "Talk-EXT NXXX" (where
"NXXX" is the extension) appears on the display.
• If the third party is on the another network DBS, "NET Talk GN"
(where "N" is the network trunk group number) appears on the display.
• The line LED for the original outside line turns red.
• The third party need only pick up the handset to speak to the outside
line.
• The line LED for the outside line on hold flashes green.
• The phone issues intercom dial tone.
T1 Networking - Revised April 2000
Network Feature Operation
DBS-2.3/9.2-540
Advertisement
Table of Contents
