Network Call Transfer; Blind Transfer - Panasonic DBS Section 540 Reference Manual

Network Call Transfer

Network Call Transfer

(CPC-EX)
A DBS Network provides two call transfer methods: blind transfer and
screened transfer.

Blind Transfer

Description
Blind transfer allows the transfer of a call directly to an extension on another
DBS, without waiting for the called extension to answer.
Operation
1. Press the HOLD key to place the outside call on hold.
2. Dial the extension number to which the call is to be transferred.
3. Replace the handset before the other party answers.
Page 110
• The line LED for the outside line on hold flashes green.
• The phone issues intercom dial tone.
• "Hold #XX" (where "XX" is the line number) appears on the display.
If the dialed extension is on the same DBS, "Call-EXT XXXX" (where
"XXXX" is the calling extension number) appears on your phone's
display.
If the dialed extension is on another DBS, the dialed extension number
appears on the display. When the call is answered, "Net Talk GN"
(where N is the network trunk group number) appears on your display.
• You can also replace the handset after the third party answers.
• The LED for the original outside line turns red when the call has been
transferred.
• If the call is transferred to an extension on the same DBS, "TRF.
NXXX #YY" (where "XXXX" is the extension and "YY" is the line)
appears on the called phone's display.
• The third party need only pick up the handset to speak to the outside
line.
T1 Networking - Revised April 2000
Network Feature Operation
DBS-2.3/9.2-540