Table of Contents
Advertisement
Network Feature Operation
Network Attendant Call
(CPC-EX)
Description
The attendant at one DBS node may be selected as a network attendant. The
network attendant can be called from any extension by simply pressing "0."
Note: If calls revert to the attendant, the calls will always revert to the local
attendant even if a network attendant is assigned.
If multiple attendants are assigned at the Network Attendant DBS, a dial "0"
call goes to the first attendant first. If the first attendant is busy, the call goes
to the second attendant. The call will continue to transfer to the next attendant
in the attendant group if necessary.
Operation
To dial the network attendant (located at another DBS):
1. Pick up the handset.
2. Press "0."
3. Complete the call and replace the handset.
To dial the network attendant (located at the same DBS):
1. Pick up the handset or press ON/OFF.
2. Press "0."
DBS-2.3/9.2-540
• The DBS "NET TALK GN" (where "N" is the network trunk group
number) appears on the display.
• An FF key LED lights if assigned to the network trunk or the EXT
LED lights.
The FF key LED or EXT LED goes off.
The phone issues intercom dial tone.
• "Talk-EXT XXXX" (where "XXXX" is the extension) appears on the
display if your extension is set for Voice Calling.
T1 Networking - Revised April 2000
Network Attendant Call
Page 107
Advertisement
Table of Contents
