Call Forwarding To Extensions On Another Node - Panasonic DBS Section 540 Reference Manual

Call Forwarding to Extensions on
Another Node
(CPC-EX)
Descriptions
Any call can be forward to an extension on another network node by
assigning the destination extension to a Speed Dial bin and assigning Call
Forward Outside to that Speed Dial.
Note: You may assign the personal speed dial number using the procedure
below. System speed dial numbers must be assigned by the operator or
system administrator.
To assign Personal Speed Dials (for forwarding to an extension on
another node):
1. Press ON/OFF.
2. Press PROG.
3. Press a One-Touch key or press AUTO followed by the personal speed
4. Dial the extension number.
5. Press HOLD.
6. Press ON/OFF.
To activate Call Forwarding to an extension on another node:
1. Press the ON/OFF key.
2. Dial "72."
Page 102
dial bin number (900-909).
Note: To forward to an extension on another node, the forwarding
number must first be programmed into personal or system speed dialing.
You can forward to any speed dial bin number (system or personal).
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
"ENTER FWD CODE" appears on the display.
T1 Networking - Revised April 2000 DBS-2.3/9.2-540