Configuring The Network Settings - Oki mc series Configuration Manual

C
ONFIGURING THE NETWORK SETTINGS
Functions such as Scan To E-mail, Scan To Shared Folder and Internet Fax enable you to
send scanned data to a computer via the network connection. To use them, you need to
set up your machine and the computer to which you want to send scanned data.
First check your computer settings and fill in the information in the Your Value column of
the "Setup Information Form," on page
using the information in Your Value.
NOTE
Be sure to set up the network connection before continuing. Refer to the Setup
Guide supplied with the machine.
Table 1: Setup Information Form
NO. ITEM
Common Setup Information
A-1 Administrator password for your machine
A-2 IP address of your machine
Setup Information Required for Scan To Email and Internet Fax
B-1 Email address for your machine
B-2 SMTP server address
B-3 POP3 server address
B-4 Receive Settings
B-5 Authentication method
B-6 SMTP user ID
B-7 SMTP password
B-8 POP user ID
B-9 POP password
B-10 Name of the email destination
B-11 Email address of the email destination
Setup Information Required for Scan To Shared Folder
C-1 Name of the destination computer
C-2 User name to log into the destination
computer
C-3 Password to log into the destination
computer
C-4 Profile name to register the settings
C-5 Shared folder name on the destination
computer
C-6 File name of the scanned data
9. Then, configure your machine and the computer
EXAMPLE
aaaaaa
192.168.0.2
mc562@test.com
smtp.test.com
pop3.test.com
SMTP
OKIMC562
okimc562
user
okimc562
User
user@test.com
PC1
mc562
mc562
Sales
SalesDev
ScanData
Configuring the network settings > 9
YOUR VALUE
(Up to 80 characters)
(Up to 32 characters)
(Up to 32 characters)
(Up to 16 characters)
(Up to 64 characters)
(Up to 64 characters)