Panasonic WV-CW634S Installation Manual page 34

Screenshot 3
The selected setup screen in the setup menu
appears on the screen.
**CAMERA SETUP**
SCENE1
ALC/ELC
SHUTTER
AGC
SENS UP
WHITE BAL
DNR
D&R(IR)
VMD
RET TOP END
Note:
• If the top screen of the setup menu is
called up with the [SET] button while the
camera is operated, the setup mode is
always "DISABLE" to prevent operation
errors.
To perform settings in the setup menu,
change the setup mode to "ENABLE".
• The cursor is a reversely highlighted part.
34
ALC
OFF
ON(HIGH)
OFF
ATW1
HIGH
AUTO1
OFF
Step 4
Perform the settings for each item.
Selection of setting item:
•
Press the [UP] button or [DOWN] button to
move the cursor.
• Change of settings:
Press the [RIGHT] button or [LEFT] button.
• Display of advanced setup screen:
Press the [SET] button when "
attached to the target setting item.
• Return to previous setup screen:
Move the cursor to "RET" and press the
[SET] button.
• Return to the top screen:
Move the cursor to "TOP" and press the
[SET] button, to display the top screen of
the setup menu.
Step 5
Move the cursor to "END" and press the [SET]
button to return to the camera image screen,
or wait about 5 minutes and the setup menu
will automatically close.
" is