Table of Contents
Advertisement
2
Previously run the cables from the wall or ceiling through the cable access hole.
3
Mount the attachment plate onto the mount bracket (mounting base).
Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}
Note:
• For wall mounting:
Installation shall be performed in such a manner that " TOP" of the attachment plate faces
upward. (Except for the case of connecting the conduit from the top. (+ page 18))
• For ceiling mounting:
The front side (model number indication face) of the camera shall be aligned in the direction of
the arrow in " FRONT" on the attachment plate.
• Ensure that any one of the arrows on the mount bracket is aligned with the arrow of " TOP" on
the attachment plate.
Attachment plate
17
Hide quick links:
Advertisement
Table of Contents
