Enabling And Disabling Parksense - Jeep grand cherokee 2015 Owner's Manual

238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Front Park Assist Audible Alerts
ParkSense® will turn off the Front Park Assist audible
alert (chime) after approximately 3 seconds when an
obstacle has been detected, the vehicle is stationary, and
brake pedal is applied.
Adjustable Chime Volume Settings
Front and Rear chime volume settings can be selected
from the Uconnect® System. Refer to Uconnect® Set-
tings" in "Understanding Your Instrument Panel" for
further information.
The chime volume settings include LOW, MEDIUM, and
HIGH. The factory default volume setting is MEDIUM.
ParkSense® will retain its last known configuration state
through ignition cycles.
Enabling And Disabling ParkSense®
ParkSense® can be enabled and disabled with the
ParkSense® switch.
When the ParkSense® switch is pressed to disable
the system, the instrument cluster will display the
"PARKSENSE OFF" message for approximately
five seconds. Refer to "Driver Information Dis-
play (DID)" in "Understanding Your Instrument Panel" for
further information. When the shift lever/gear selector is
moved to REVERSE and the system is disabled, the DID will
display the "PARKSENSE OFF" message for as long as the
vehicle is in REVERSE.
The ParkSense® switch LED will be ON when
ParkSense® is disabled or requires service. The
ParkSense® switch LED will be OFF when the system is
enabled. If the ParkSense® switch is pressed, and the
system requires service, the ParkSense® switch LED will
blink momentarily, and then the LED will be ON.