Buttons On The Touchscreen; Uconnect® 5.0 Personal Settings - Jeep grand cherokee 2015 Owner's Manual

322 UNDERSTANDING YOUR INSTRUMENT PANEL

Buttons On The Touchscreen

Buttons on the touchscreen are accessible on the
Uconnect® display.
Customer Programmable Features — Uconnect®
5.0 Personal Settings
Push the MORE button on the faceplate to display the
menu setting screen. In this mode the Uconnect® system
allows you to access programmable features that may be
equipped such as Display, Voice, Clock & Date, Safety &
Assistance, Lights, Doors & Locks, Auto-On Comfort,
Engine Off Options, Suspension, Compass Settings, Au-
dio, Phone/Bluetooth®, Sirius Setup, Restore Settings,
and Clear Personal Data.
NOTE: Only one touchscreen area may be selected at a
time.
When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired
mode, press and release the preferred setting and make
your selection. Once the setting is complete, either press
the Back Arrow/Done button on the touchscreen or the
Back button on the faceplate to return to the previous
menu or press the "X" button on the touchscreen to close
out of the settings screen. Pressing the Up or Down
Arrow buttons on the right side of the screen will allow
you to toggle up or down through the available settings.
NOTE: All settings should be changed with the ignition
in the "Run" position.
Display
After pressing the "Display" button on the touchscreen
the following settings will be available.
• Display Mode
When in this display you may select the "Auto" or
"Manual" display settings. To change Mode status, press