4WD LOW
This range is for low speed four-wheel drive. It provides
an additional gear reduction which allows for increased
torque to be delivered to both the front and rear wheels
while providing maximum pulling power for loose,
slippery road surfaces only. Do not exceed 25 mph
(40 km/h).
NOTE: Refer to "Selec-Terrain® – If Equipped" for fur-
ther information on the various positions and their
intended usages.
Shifting Procedures
4WD HI To 4WD LOW
With the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), the
ignition switch in the ON position or the engine running,
shift the transmission into "N", and push the "4WD
LOW" button once on the transfer case switch. The "4WD
LOW" indicator light in the instrument cluster will begin
to flash and remain on solid when the shift is complete.
Transfer Case Switch
STARTING AND OPERATING 443
5