28
en | Trouble events
Control Panels
8.3 User and burglary trouble events
The security company can program a keypad to emit the trouble
tone (three tones followed by a pause repeated), when a user or
burglary trouble event occurs.
If the system is on, the display shows the number of points with
troubles and the name for each point.
8.3.1 Silence user and burglary trouble events
Press [ENTER] to silence the trouble tone.
8.3.2 View user and burglary trouble events
After a user enters a passcode, the name of the point in trouble
continues to scroll through the display. Use
/[NEXT] to scroll
text manually. Events scroll from oldest to newest.
8.4 System trouble events
Examples of system trouble displays include Service AC Failure
and Service Battery Low. These displays appear on all keypads in
the system. All system trouble displays begin with SERV or
Service. The Service text clears only after the faulted condition is
corrected.
Press [ENTER] to silence the trouble tone.
2015.01 | 02 | F.01U.307.371
Bosch Security Systems, Inc.