To Obtain A Good Color Balance On Thick Paper - Toshiba e-STUDIO 2500c Manual

2. Copier-specific Adjustments

2.13 To Obtain a Good Color Balance on Thick Paper

Before the adjustment
The copy image looks light on thick paper.
Explanation
When a copy is made on thick paper in the thick paper mode, the copy image sometimes looks light. In the thick
paper mode, the amount of toner used is reduced in advance, in order to avoid a toner fixing problem. Adjust the
amount of toner used, while checking the toner fixing, in order to obtain a dark and sharp copy image on thick paper.
Procedures
* You can start with any of the procedures. But it is recommended to perform the procedures in order, as listed
below. You can use one procedure in conjunction with another. But if this changes the image quality more
than required or loses the effectiveness of the adjustment, restore the settings made in the previously used
procedure to the original ones. Then use other procedures.
* Only the service technician must use procedures (1) and (3).
* Both the service technician and the user can use procedure (2).
2.13
e-STUDIO2500c/3500c/3510c
After the adjustment
The copy image looks darker and sharper even
on thick paper.