To Adjust The Print Image Quality In The Color Mode - Toshiba e-STUDIO 2500c Manual

3. Printer-specific Adjustments

3.14.1 To Adjust the Print Image Quality in the Color Mode

* Perform the adjustment in accordance with the procedures below.
* Both the service technician and the user can use procedures (1), (2), and (3).
* Only the service technician must use procedures (4) and (5).
(1) Change the "Image Quality Type" and "Halftone" options.
For Windows
PCL6 PS3
Open the property page of the printer driver. Change the "Image Quality Type" and "Halftone" options in
the Image Quality tab.
• Set either of the following options, in accordance with the type of original to print:
• Image Quality Type: "Presentation" (To make color darker)
Halftone:
• Image Quality Type: "Line Art" (To make the color darker and enhance thin lines)
Halftone:
3.14
e-STUDIO2500c/3500c/3510c
* This adjustment will have an effect only on Auto or Color mode printing.
"Detail" (To make the halftone screen high frequency)
"Auto" or "Detail" (To make the halftone screen high frequency)