Download Print this page

Downdraft Operation - Wolf Dd36i Use & Care Manual

Hide thumbs Also See for Dd36i:

Advertisement

Downdraft Operation

Downdraft Controls
ACTIVATION
To activate the downdraft, press the UP/DOWN button
on the control module.
Once the UP/DOWN button is pressed, the downdraft
blower will turn on at the last speed used, or on
medium for first time use.
BLOWER SPEED
To adjust the speed of the blower, press the HIGH,
MEDIUM or LOW button. The corresponding LED will
illuminate to indicate the blower speed.
FILTER CLEAN INDICATOR
The LED next to the FILTER button on the control
module will illuminate when it is time to clean the filters.
This indicator light comes on after approximately 30
hours of operation. Refer to filter care on page 9.
To reset the FILTER clean LED indicator, press the
FILTER button.
Three-speed
blower controls
Filter clean indicator
Downdraft control module.
UP/DOWN button
DELAY button
DELAY-OFF FEATURE
The delay-off feature will allow the downdraft blower to
continue operating at the selected speed for approxi-
mately five minutes after the DELAY button has been
pressed. This feature allows you to leave the cooking
area, while the downdraft system is still in operation, it
will then shut off and the chimney will stay up.
In delay-off mode, both the DELAY LED and the corre-
sponding blower speed LED will be illuminated.
If the blower is on high speed and the DELAY button is
pressed, the blower will stay on high speed for five
minutes. It will then switch to low speed for an addi-
tional five minutes before turning off. The chimney will
stay up.
If the blower is on medium speed and the DELAY
button is pressed, the blower will stay on medium
speed for five minutes. It will then switch to low speed
for an additional five minutes before turning off. The
chimney will stay up.
If the blower is on low speed and the DELAY button is
pressed, the blower will stay on low speed for five
minutes before turning off. The chimney will stay up.
If the DELAY button is pressed when the blower is off
or when the chimney is down, no operation will take
place.
If the DELAY button is pressed when the unit is already
in delay-off mode the delay-off feature will be
cancelled.
7
wolfappliance.com

Advertisement

loading