Advanced Administrator Options; Setting The Date And Time - Aastra 6751i RP Administrator's Manual

Advanced Administrator Options

Once you have added phones and users to your system, there are a variety of options you can change if you choose to, such
as the system date and time, and the email server to use for sending voicemail attachments.

Setting the Date and Time

You can change the date and time of the base unit clock, which appears on the Base Unit page. The date and time display
can be used to identify backups and other activities on the base unit. The display is refreshed from the base unit clock
periodically. At any given time, it may not match the base unit clock precisely.
You can also specify a new time zone for the base unit, if necessary, and specify whether you want to manually or
automatically adjust the time for changes such as daylight savings.
Note: When you confirm the changes that you want to make the base unit will restart, which could take several minutes.
Notify users that incoming calls will not get through and active calls may be disconnected when the base unit restarts.
To change the date and time on the base unit do the following.
1 Click the Base Unit button.
2 Click Change Date and Time under the heading Properties.
3 In the Set Date and Time dialog box, select the options that you want and click OK.
Note: The values in the base unit date and time options initially reflect the current settings from the base unit. Because these
settings are not updated in real time when the dialog box is open, they will not match the base unit's current date and time
for long.
4 A warning appears, indicating that the base unit will restart if you continue.
5 Click Yes to save the date and time, and restart the base unit.
6 Click OK.
28 AastraLink RP System Administrator Guide