Editing A Phone; Removing A Phone - Aastra 6751i RP Administrator's Manual

Editing a Phone

You can change who is assigned to a phone, the phone owner, and the phone name by editing a phone in Administrator.
To edit a phone using the Administrator software, do the following.
1 Click the Phone System button.
2 In the Tasks pane, under Phones, click Edit Phone. The the Select the phone you want to edit list opens.
3 Click the phone that you want to edit, and then click OK. Some pages of the Configure Phone Wizard will be displayed,
starting with Confirm the identity of the phone. If the options are unavailable, click Next.
4 On the Who will receive calls on this phone page, make any changes that you want, including changing the primary user
of the phone and adding a new user.
5 On the What do you want to name this phone page, change the name if you want to do so.
6 Click Finish.
7 When the configuration process is complete, click Close.
The changes you have made will appear on the phone screen once it has finished restarting. The phone will not be
available for use during the restarting process.

Removing a Phone

You can remove a phone from the phone system. Removing a phone does not change the settings on the phone itself;
however, the base unit will no longer recognize it, and it must be reconfigured if you add it to the phone system again.
Note: If you just want to move a phone to another location, do not remove the phone through Administrator; just unplug it
instead. The phone configuration is maintained by the base unit so that when it is plugged back in, the phone is registered with
the base unit as before. No additional configuration is needed.
To remove a phone from your AastraLink RP Solution, use Administrator to do the following.
1 Click the Phone System button.
2 In the Tasks pane, under Phones, click Remove Phone. The Select the phone you want to remove list opens.
22 AastraLink RP System Administrator Guide