Time And/Or Date Is Not Correct; Error Messages On The Screen; Tips - Fujitsu Siemens Computers PRIMERGY Econel 50 Operating Manual

Troubleshooting and tips

Time and/or date is not correct

You can set the time and date in the BIOS Setup or in the operating system.
Ê
Set the time and date.
If the time and date are repeatedly wrong when you switch on your server, the on-board
i
battery is flat. Change the lithium battery as described in the technical manual for the
D1859 system board.

Error messages on the screen

Error messages and their explanation are contained:
in the technical manual for the D1859 system board
in the "D1859 Setup Utility for Econel 50" manual
in the documentation for the programs used

Tips

The server cannot be switched off with the ON/OFF button
Cause: The server has not been switched on with the ON/OFF button.
Ê
Press the ON/OFF button again.
Cause: System crash
Ê
Press and hold the ON/OFF button for at least four seconds until the server switches off.
Out of system resources
If you have too many applications running at once, you may experience problems due to a lack of
system resources. In this case you should:
Ê
close unnecessary applications
or
Ê
run the applications in a different order
Other manuals
Other manuals are contained on the ServerBooks CD delivered with your system.
30
A26361-K831-Z502-1-7619