Connecting External Devices To The Usb Ports - Fujitsu Siemens Computers PRIMERGY Econel 50 Operating Manual

Hide thumbs Also See for PRIMERGY Econel 50:
Table of Contents

Advertisement

Connecting external devices

Connecting external devices to the USB ports

You can connect a wide range of external devices to the USB port (e.g. printer, scanner, modem or
keyboard).
Devices with USB interfaces are hot-pluggable. This allows cables from those devices to
i
be connected and disconnected with the system switched on.
Additional information can be found in the documentation for the corresponding devices.
Ê
Connect the data cable to the external device.
Ê
Connect the data cable to the USB port
Device drivers
i
The devices you connect to the USB port usually require no driver of their own, as the
required software is already included in the operating system. However, if the device
requires its own software, please install it from the data carrier provided with the device.
A26361-K831-Z502-1-7619
.
Preparing for use
17

Advertisement

Table of Contents
loading

Table of Contents