Table of Contents
Advertisement
Operation
Indicators on the server
The indicators are on the front of the server. Which indicators are available on your server depends
on the configuration level you have selected.
1 = Power-on indicator
2 = Hard disk indicator
3 = CD-ROM indicator
4 = Floppy disk indicator
1 - Power-on indicator
The indicator lights green:
The server is on.
The indicator lights orange:
The server is in energy-saving mode. After being switched on, the server returns to the
state it was in before the energy-saving mode.
CAUTION!
!
In an energy-saving mode the server must not be switched off with the main
switch or disconnected from the mains supply, as this may result in data loss.
The indicator does not light up:
The server is switched off (main switch at 0 or disconnected from the power supply).
2 - Hard disk indicator
The indicator lights up when a hard disk drive of the server is accessed.
20
Indicators on the server
1
2
3
4
A26361-K831-Z502-1-7619
Advertisement
Table of Contents
