Loading Paper - Muratec F-112 Series User Manual

Loading Paper

You can load approximately 250 sheets.
To load a stack of Letter-sized paper:
1
Pull open the paper tray and remove it from the machine.
2
Push down on the pressure plate until it locks into place.
3
Fan the edges of the paper stack to separate the pages. Then tap the
stack on a flat surface to even it up.
4
Insert the paper stack into the paper tray with the side you want to
print facing up.
N : If you want to load a different size of paper, you need to adjust the
OTE
paper guides. For details, see page 1.10.
5
Pay attention to the paper limit mark on the left inside wall of the tray.
Paper overloading may cause paper jams.
6
Insert and slide the paper tray back into the machine.
N : After you load the paper, you need to set up your machine for the paper
OTE
type and size you loaded. See page 1.16.
1.9
G S
ETTING TARTED
1