Clearing Paper Jams; In The Paper Tray - Muratec F-112 Series User Manual

Clearing Paper Jams

When a paper jam occurs, "Paper Jam" appears on the display. Refer to the
table below to locate and clear the paper jam.
Message
[Paper Jam 0]
Open/Close Door
[Paper Jam 1]
Open/Close Door
[Paper Jam 2]
Check Inside
To avoid tearing the paper, pull the jammed paper out gently and slowly.
Follow the steps on the next pages to clear the jam.

In the Paper Tray

1
Open and close the front cover. The jammed paper automatically exits
the machine.
If the paper does not exit, continue to step 2.
2
Pull the paper tray open.
3
Remove the jammed paper by gently pulling it straight out.
If there is any resistance and the paper does not move when you pull
or if you cannot see the paper in this area, skip to the fuser area
around the toner cartridge. See page 6.4.
4
Insert the paper tray into the machine until it snaps into place.
5
Open and close the front cover to resume printing.
Location of Jam
In the paper tray.
In the fuser area or around
the toner cartridge.
In the manual feeder
In the paper exit area
T
Go to
page 6.3
page 6.4
page 6.5
page 6.4
6.3
ROUBLESHOOTING
6