Setting The Date And Time - Muratec F-112 Series User Manual

Keypad Letters and Numbers
Key Assigned numbers, letters or characters
1 1 Space
2 A B C 2
3 D E F 3
4 G H I 4
5 J K L 5
6 M N O 6
7 P Q R S
8 T U V 8
9 W X Y Z
0
+ - , .
Changing Numbers or Names
If you make a mistake while entering a number or name, press the
button to delete the last digit or character. Then enter the correct numbers
or characters.
Inserting a Pause
With some telephone systems, you must dial an access code (9, for
example) and listen for a second dial tone. In such cases, you must insert
a pause in the telephone number. You can insert a pause while you are
setting up one-touch or speed dial numbers.
To insert a pause, press Redial/Pause at the appropriate place while
entering the telephone number. A "–" appears on the display at the
corresponding location.

Setting the Date and Time

The current date and time are shown on the display when your machine is
on and ready to work. All of your faxes will have the date and time printed
on them.
N : If power to the machine is cut off, you need to reset the correct time and
OTE
date once the power is restored.
1
Press Menu until "Machine Setup" appears on the top line of the
display.
2
Press the scroll button (
bottom line and press Enter.
3
Enter the correct time and date using the number keypad.
Month = 01 ~ 12
Day = 01 ~ 31
Year = requires all four digits
Hour = 01 ~ 12 (12-hour mode)
00 ~ 23 (24-hour mode)
Minute = 00 ~ 59
7
9
'
/ * # & 0
or ) to display "Date & Time" on the
1.15
G S
ETTING TARTED
1