Table of Contents
Advertisement
Main Menu
Table of Contents
Fuses
Checking and Replacing Fuses
If something electrical in your
vehicle stops working, the first thing
you should check for is a blown fuse.
Determine from the chart on pages
384
through
386
, or the diagram on
the fuse box lid, which fuse or fuses
control that device. The diagram for
the interior driver's side fuse box is
on the kick panel below the fuse box.
Check those fuses first, but check all
the fuses before deciding that a
blown fuse is the cause. Replace any
blown fuses, and check if the device
works.
Turn the ignition switch to the
1.
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
2.
Remove the cover from the fuse
box.
382
FUSE
BLOWN
3.
Check each of the large fuses in
the primary under-hood fuse box
by looking through the top at the
wire inside. Removing these fuses
requires a Phillips-head
screwdriver.
FUSE PULLER
Check the smaller fuses in the
4.
under-hood fuse box and all the
fuses in the interior fuse boxes by
pulling out each fuse with the fuse
puller provided in the primary
under-hood fuse box.
Advertisement
Table of Contents
