Table of Contents
Advertisement
Main Menu
Table of Contents
On Touring models only
Your vehicle has a memory feature
for the driver's seat position.
Two seat positions can be stored in
separate memories. You select a
memorized position by pushing the
appropriate button or appropriate
remote transmitter (Driver 1 or
Driver 2). For more information, see
page
139
.
Storing a Driver's Seat Position in
Memory
Store a driver's seat position only
when the vehicle is parked.
1.
Turn the ignition switch to the ON
(II) position. You cannot add a
new seat position in memory
unless the ignition switch is in the
ON (II) position. You can recall a
memorized position with the
ignition switch in any position.
2.
Adjust the seat to a comfortable
position (see page
155
).
Driver's Seat Position Memory System
MEMORY BUTTONS
Press and release the MEMO
3.
button on the control panel. You
will hear a beep. Immediately
press and hold one of the memory
buttons (1 or 2) until you hear two
beeps. The indicator in the
memory button will come on. The
current driver's seat position is
now stored.
MEMO BUTTON
CONTINUED
165
Advertisement
Table of Contents
