Table of Contents
Advertisement
Main Menu
Table of Contents
TABS
FLOOR MAT
SLIT
COVER
Install the cover over the outer floor
anchor and install the floor mat over
the cover. Insert the tabs on the floor
mat into the slit on the floor. Fasten
the buttons on the floor mat to the
floor.
Make sure the seat is securely
locked in place before driving. A seat
that is not locked in place could fly
around and cause injury in a sudden
stop or crash.
Reverse this procedure to move the
seat back to the outside.
When the passenger's side bucket
seat is in the outside position, and
the plus-one seat or the second row
console is not used, install the floor
mat and the cover over the center
floor anchors between the bucket
seats. Make sure to fasten the
buttons on the mat to the floor.
Removing the Bucket Seats in the
Second Row
LOCK RELEASE LEVER
Both seats can be removed to give
more cargo capacity.
To remove a seat:
Pull up the seat-back angle
adjustment lever, and fold the seat-
back forward.
Unlock the seat from the floor by
pulling the lock release lever under
the seat cushion's front edge and
lifting the rear of the seat.
CONTINUED
Seats
159
Advertisement
Table of Contents
