Table of Contents
Advertisement
Main Menu
Table of Contents
Multi-Information Display
Keyless Lock Acknowledgment
When you push the LOCK button on
the remote transmitter, some
exterior lights flash, and a beeper
sounds when you push the LOCK
button again within 5 seconds to
verify that the doors and the tailgate
are locked and the security system
has set (see page
137
). You can
customize the exterior lights not to
flash and the beeper not to sound.
118
While the multi-information display
shows ''DOOR·WINDOW SETUP,''
press the SEL/RESET button on the
steering wheel. Then press the
INFO button repeatedly until you see
''KEYLESS LOCK
ACKNOWLEDGMENT'' as shown
above.
Press SEL/RESET button, then
press the INFO button.
Each time you press the INFO
button, the display changes to ''ON,''
to ''OFF,'' then to ''EXIT.''
Select ''ON'' or ''OFF'' by pressing
the INFO button, and enter your
selection by pressing the SEL/
RESET button.
Advertisement
Table of Contents
