Table of Contents
Advertisement
Main Menu
Table of Contents
Changing a Flat Tire
If you have a flat tire while driving,
stop in a safe place to change it.
Drive slowly along the shoulder until
you get to an exit or an area that is
far away from the traffic lanes.
The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.
Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.
366
SPARE TIRE
TOOLS
JACK
1.
Park the vehicle on firm, level, and
non-slippery ground. Put the
transmission in Park. Apply the
parking brake.
If you are towing a trailer, unhitch
the trailer.
2.
Turn on the hazard warning lights,
and turn the ignition switch to the
LOCK (0) position. Have all
passengers get out of the vehicle
while you change the tire.
3.
The jack is behind a cover in the
cargo area on the driver's side,
and tools are on the back of the
cover. Remove the cover by
pushing the tabs down and pulling
the cover out.
4.
Turn the jack's end
counterclockwise to loosen it, then
remove the jack.
Advertisement
Table of Contents
