Table of Contents
Advertisement
Main Menu
Table of Contents
Elapsed Time Reset
As the default setting, the elapsed
time resets each time you turned the
ignition switch to the ON (II)
position (see page
76
).
You can change this resetting
condition to when ''TRIP A'' or
''TRIP B'' is reset (see page
77
).
While the multi-information display
shows ''METER SETUP'' of the
''CUSTOMIZE GROUP,'' press the
SEL/RESET button on the steering
wheel. The display changes to
''CUSTOMIZE MENU.'' Press the
INFO button repeatedly until you see
''ELAPSED TIME RESET'' in the
lower segment as shown above.
Multi-Information Display
Press the SEL/RESET button. The
display changes as shown above.
There are three possible settings:
IGN RESET: The elapsed time
resets each time the ignition switch
is turned to the ON (II) position.
TRIP A RESET: The elapsed time
resets each time the TRIP A is reset.
TRIP B RESET: The elapsed time
resets each time the TRIP B is reset.
CONTINUED
105
Advertisement
Table of Contents
