D-Link DES-3528 User Manual page 212

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Click Apply to set this entry in the Switch's memory.
To view the settings of a previously correctly created profile, click the corresponding Show Details button on the CPU
Access Profile List window to view the following window:
Figure 10- 3 . CPU Access Profile Detail Information window for IPv6
The window shown below is the Add CPU ACL Profile window for Packet Content.
The following parameters may be configured for the Packet Content filter.
Parameter Description
Select Profile Use the drop-down menu to select a unique identifier number for this profile set. This value can
ID be set from 1 to 5.
Select ACL Select profile based on Ethernet (MAC Address), IP address, IPv6, or packet content mask. This
Type will change the menu according to the requirements for the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header.
Select IP to instruct the Switch to examine the IP address in each frame's header.
Select IPv6 to instruct the Switch to examine the IP address in each frame's header.
Select Packet Content Mask to specify a mask to hide the content of the packet header.
4
Figure 10- 35. Add CPU ACL Profile window for Packet Content
196