D-Link DES-3528 User Manual page 209

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Figure 10- 3 . CPU Access Profile Detail Information window for Ethernet
The window shown below is the Add CPU ACL Profile window for IP (IPv4).
The following parameters may be configured for the IP (IPv4) filter.
Parameter
Select Profile ID
Select ACL Type
802.1Q VLAN
IPv4 DSCP
0
Figure 10- 31. Add CPU ACL Profile window for IP (IPv4)
Description
Use the drop-down menu to select a unique identifier number for this profile set. This value
can be set from 1 to 5.
Select profile based on Ethernet (MAC Address), IP address, IPv6, or packet content mask.
This will change the menu according to the requirements for the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header.
Select IP to instruct the Switch to examine the IP address in each frame's header.
Select IPv6 to instruct the Switch to examine the IP address in each frame's header.
Select Packet Content Mask to specify a mask to hide the content of the packet header.
Selecting this option instructs the Switch to examine the VLAN part of each packet header
and use this as the, or part of the criterion for forwarding.
Selecting this option instructs the Switch to examine the DiffServ Code part of each packet
header and use this as the, or part of the criterion for forwarding.
193