D-Link DES-3528 User Manual page 164

Xstack
Hide thumbs Also See for DES-3528:
Table of Contents

Advertisement

xStack DES-3528 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
Cache Timeout
(60-86400)
RSA with
RC4_128_MD5
RSA with 3DES EDE
CBC SHA
DHE DSS with 3DES
EDE CBC SHA
RSA EXPORT with
RC4 40 MD5
Server IP
Certificate File Name
Key File Name
This field will set the time between a new key exchange between a client and a host using
the SSL function. A new SSL session is established every time the client and host go
through a key exchange. Specifying a longer timeout will allow the SSL session to reuse the
master key on future connections with that particular host, therefore speeding up the
negotiation process. The default setting is 600 seconds.
SSL Ciphersuite Settings
This ciphersuite combines the RSA key exchange, stream cipher RC4 encryption with 128-
bit keys and the MD5 Hash Algorithm. Use the pull-down menu to enable or disable this
ciphersuite. This field is enabled by default.
This ciphersuite combines the RSA key exchange, CBC Block Cipher 3DES_EDE
encryption and the SHA Hash Algorithm. Use the pull-down menu to enable or disable this
ciphersuite. This field is enabled by default.
This ciphersuite combines the DSA Diffie Hellman key exchange, CBC Block Cipher
3DES_EDE encryption and SHA Hash Algorithm. Use the pull-down menu to enable or
disable this ciphersuite. This field is enabled by default.
This ciphersuite combines the RSA Export key exchange and stream cipher RC4 encryption
with 40-bit keys. Use the pull-down menu to enable or disable this ciphersuite. This field is
enabled by default.
SSL Certificate Download
Enter the IP address of the TFTP server where the certificate files are located.
Enter the path and the filename of the certificate file to download. This file must have a .der
extension. (Ex. c:/cert.der)
Enter the path and the filename of the key file to download. This file must have a .der
extension (Ex. c:/pkey.der)
NOTE: Enabling the SSL command will disable the web-based switch management.
To log on to the Switch again, the header of the URL must begin with https://.
Entering anything else into the address field of the web browser will result in an error
and no authentication will be granted.
148

Advertisement

Table of Contents
loading

Table of Contents