Multitech MultiMobile MT5634ZLX/FE User Manual page 19

Command Options
&P0 (default)
&P1
&Rn
&R0 (default)
&R1
&Sn
&S0 (default)
&S1
&Tn
&T0 (then ^ATO)
&T1
&T3
&Vn
&V0
&Wn
&W0
&W1
&Yn
&Y0
&Zn=x
x=<string>
%A
%Cn
%C0
%C1 (default)
\Gn
\G0 (default)
\G1
\Jn
\J0 (default)
\J1
MT5634ZLX, MT5634ZLXI, MT5634ZLX/FE User Guide
Chapter 4 – AT Commands, S-Registers, and Result Codes
Function & Description
Make=40%, Break=60% for use in North America.
Make=33%, Break=67% for International use.
CTS/RTS option (for non-CTS flow control mode and synchronous mode
only).
CTS follows RTS.
CTS always true.
Data Set Ready (DSR) option.
DSR always on.
DSR on during handshake and on-line, off in test mode or idle mode.
Self-test commands.
Terminate test.
Local analog loopback test.
Local activated remote digital loopback (RDL) test.
View active configuration and stored profile.
View active file, stored profile #0 and stored phone numbers.
Store active profile.
Save active configuration as user profile #0.
Save active configuration as user profile #1.
Select stored profile on power-up.
Recall user profile 0 on power-up.
Store telephone number n=0 to 3.
See also the dial modifier in "ATDn" command. The maximum number of
digits per string is 36.
Adaptive Answer Result Code Enable.
Data compression option.
No compression.
MNP 5 compression.
Set modem port flow control.
Disable port flow control.
Set port flow control to XON/XOFF.
Constant DTE speed option.
DCE and DTE rates are independent.
DTE rate adjusts to DCE connection rate after on-line.
19