1. Manuals
  2. Brands
  3. Multitech Manuals
  4. Modem
  5. MultiMobile MT5634ZLX
  6. Owner's manual

Multitech MT5634ZLX Owner's Manual

Hide thumbs Also See for MT5634ZLX:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Models MT5634ZLX/E
and MT5634ZLX/E-T/2
Owner's Manual

Advertisement

Table of Contents
loading

Related Manuals for Multitech MT5634ZLX

Summary of Contents for Multitech MT5634ZLX

  • Page 1 Models MT5634ZLX/E and MT5634ZLX/E-T/2 Owner’s Manual...
  • Page 2 Owner’s Manual MultiMobile Model # MT5634ZLX/E & MT5634ZLX/E-T/2 P/N 82067101 This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi- Tech Systems, Inc. All rights reserved. Copyright © 1998 by Multi Tech Systems, Inc.

  • Page 3: Table Of Contents

    Features ..............11 System Requirements ..........12 Ship Kit Contents ............ 13 Chapter 2 - Installation Safety Warnings ............. 14 Installing The MT5634ZLX/E or MT5634ZLX/E-T/2 Card(s) ........14 Driver Software Installation ........16 Novell NetWare Installation ........16 Menu Installation ..........16 Manual Driver Installation ........
  • Page 4 Chapter 3 - Comprehensive Driver Notes Introduction ............. 31 Factory Default Settings ......... 31 Quick Start .............. 31 PC Card Software - Manual Installation ..31 Getting Started ............33 Using DOS Extended Memory Managers ....33 Driver Directory Structure ........34 Driver Upgrades .............
  • Page 5 ........45 When I run CARDEN, “PC-Card is not enabled successfully” is displayed ....45 Enabling the MT5634ZLX ....... 46 Installing the Win 95 Driver over SystemSoft CardWorks ............ 46 The NetWare driver runs successfully but fails to login to the Netware server .......
  • Page 6 About CompuServe/Internet ........55 About the Multi-Tech Fax-Back System ....56 Appendix A - Specifications Appendix B - AT Commands, S-Registers & Result Codes Introduction ............. 58 How To Use AT Commands ........58 Basic AT Commands ..........60 AT& (Ampersand) Commands ....... 64 AT% (Percent) Commands ........

  • Page 7: Chapter 1 - Introduction And Description

    Ethernet 10BaseT LAN; and it uses only one PCMCIA slot while performing these functions. The MT5634ZLX is a credit-card-size Type II PCMCIA card that complies with the PCMCIA 2.1 and JEIDA 4.1 standards and works with computers that incorporate a compatible interface.
  • Page 8 MT5634ZLX Owner’s Manual Using standard phone lines and 10BaseT Ethernet, the MT5634ZLX permits you to access servers on a LAN and connect to the Internet or on-line computer networks such as CompuServe and America Online; and permits you to transmit E-Mail, send and receive information and communicate with other PCs.

  • Page 9: Specifications

    (to PC card); with the other end of the cable terminated with one RJ-11 receptacle connector for PSTN and one receptacle BNC T-connector converting 10Base-T to 10Base2 for LAN. Network IEEE 802.3 10BaseT (MT5634ZLX), 10Base2 (MT5634ZLX/E)--10M bps NE2000 compatible...

  • Page 10: Modem Characteristics

    MT5634ZLX Owner’s Manual Modem Characteristics Client-to-Server Data Rates *K56flex speeds when accessing an ISP- type K56flex server (actual speed depend on server capabilities and line conditions) Client-to-Client Data Rates 33,600, 31,200, 28,800, 26,400, 24,000, 21,600, 19,200, 16,800, 14,400, 12,000, 9600, 7200, 4800, 2400, 1200, 0-300 bps V.42 bis &...

  • Page 11: Features

    1 - Introduction and Description Features • Compatible with most notebook, laptop and portable computers • Compatible with Card and Socket Services • Easy to install and use • Card is hot swappable • Supports popular Network OSs (e.g., LANtastic, NetWare, LAN Manager, Windows 3.x, Windows for Workgroups, Windows NT, and Windows 95...

  • Page 12: System Requirements

    RJ11 jack for connecting to a phone receptacle • an RJ45 jack for 10BaseT connection to your Ethernet LAN (MT5634ZLX) • an BNC T-connector for 10Base2 connection to your Ethernet LAN (MT5634ZLX/E) • Driver software loaded on your PC • Data and/or Fax communications software...

  • Page 13: Ship Kit Contents

    1 - Introduction and Description Ship Kit Contents Your MT5634ZLX/E is shipped from the factory with the following: • an MT5634ZLX/E PCMCIA LAN/Fax/Modem Card • one cable with a 15-pin detachable connector (to PC card) terminated on one end; with the...

  • Page 14: Chapter 2 - Installation

    Do not use the telephone to report a gas leak in the vicinity of the leak. Installing The MT5634ZLX/E or MT5634ZLX/E-T/2 Card(s) Insert the MT5634ZLX into the computer’s PCMCIA slot with the 68-pin connector facing the PCMCIA slot and the label facing up and slide the card into the slot.
  • Page 15 E-T/2 is powered directly from the PC. Connect the MT5634ZLX/E to the network (LAN) using the RJ-45 (8-pin) plug. 3a . Connect the MT5634ZLX/E-T/2 to the network (LAN) using a “thin coax” cable. Allign the notches of the cable to that of the BNC T- connector, and twist clock wise approximately one-quarter turn.

  • Page 16: Driver Software Installation

    NDIS 2.x or Packet Drivers) onto the target disk. The NOS selection screen is displayed: Figure 2-1. NOS Selection Screen Novell NetWare Installation There are two methods to install the MT5634ZLX under NetWare: Menu Installation and Novell Client Installation (for NetWare versions 3.12 and 4.x). Menu Installation Run INSTALL.EXE from Driver diskette‘s root...
  • Page 17 2 - Installation Move the cursor to highlight the settings you want to change and press Enter to select an appropriate value. When the configurations are set completely, press Enter on the OK field to exit the screen. The Installation program copies related files from the Drivers diskette to the destination directory and modifies the AUTOEXEC.BAT and NET.CFG files as...

  • Page 18: Manual Driver Installation

    MT5634ZLX Owner’s Manual Manual Driver Installation If you wanted to install the ODI driver manually, perform the following instructions: Copy the files LM28ODI.COM and NET.CFG from the directory \NETWARE and the file CARDEN.EXE and LMVXD.386 from the directory \ENABLER on the Driver diskette.

  • Page 19: Novell Client Installation

    BACKUP? (Y/N): No Answer accordingly and provide a path if necessary. Select a driver for your MT5634ZLX. From the driver list, select Other Drivers. Go to the Insert the Driver Disk dialog box and specify the path where the ODI driver and INS files reside.
  • Page 20 MT5634ZLX Owner’s Manual Specify the driver’s optional settings. 10. Press F10 to save to new configuration. 11. Highlight Install press here and press <Enter> to install. The program copies the necessary files for NetWare Client. 12. Continue the installation procedure to completion.

  • Page 21: Microsoft Lan Manager Installation

    2 - Installation Microsoft LAN Manager Installation View the README.TXT on the installation diskette in the \NDIS2 directory. Before installing the drivers, ensure that the Microsoft LAN Manager has been installed in the target path. The installation program will check and modify the PROTOCOL.INI file for LAN Manager.
  • Page 22 MT5634ZLX Owner’s Manual Figure 2-3. Microsoft LAN Manager Installation Screen A sample LAN Manager PROTOCOL.INI file: [PROTMAN] DRIVERNAME = PROTMAN$ DYNAMIC = YES PRIORITY = NETBEUI [NETBEUI_XIF] Drivername = netbeui$ SESSIONS = 6 NCBS = 12 BINDINGS = “LM28NDS2_NIF” LANABASE = 0 [LM28NDS2_NIF] ;...

  • Page 23: Packet Driver Installation

    2 - Installation Packet Driver Installation Run INSTALL.EXE from the root directory of the Drivers diskette. Select the Packet Driver item on the Menu screen. If the current settings are acceptable, select Start Installation and go to step 4. Otherwise, select Modify Parameters to make setting changed.
  • Page 24 MT5634ZLX Owner’s Manual In the Network Drivers dialog box, press Add Adapter... button to enter Add Network Adapter dialog box. Select Unlisted or Updated Network Adapter and press OK. Windows will prompt a Install Driver dialog box. Place the Drivers diskette into the floppy drive and press OK.

  • Page 25: Ndis2 Driver For Workgroup

    2 - Installation NDIS2 Driver for Workgroup Run Windows for Workgroups and click the Network Setup icon in the Network group. In the Network Settings dialog box, click the Networks... button to select the network operating system. In the Networks dialog box, check the radio button before Install Microsoft Windows Network and No Additional Network.

  • Page 26: Odi Driver For Workgroups

    MT5634ZLX Owner’s Manual 12. Move the cursor to the setting(s) you want to change and press Enter to select a new value. When the configuration is set completely, press Enter on the OK field to exit the screen and go back to step 11.
  • Page 27 2 - Installation Place the driver diskette in the floppy drive and press OK. Select the Netware ODI Driver ... string and press OK. Follow the on-screen Windows’ instructions to complete the installation, then exit Windows. Run INSTALL.EXE from the root directory of the Drivers diskette.

  • Page 28: Windows Nt 3.51 / Nt 4.0 Installation

    MT5634ZLX Owner’s Manual Windows NT 3.51 / NT 4.0 Installation Install the PCMCIA support for your particular make and model of laptop from the Service Packs. Note that: These must be verified to be working properly before continuing, and support for this level of driver is from the laptop manufacturer only.

  • Page 29: Windows 95 Installation

    Any questions on this layer must be taken up with the computer’s manufacturer. Insert the MT5634ZLX into PCMCIA slot. Windows 95 will prompt New Hardware Found dialog box (shown below). In New Hardware Found dialog box, select Driver from disk provided by hardware manufacturer.

  • Page 30: Artisoft Lantastic 6.0 Installation

    MT5634ZLX Owner’s Manual For a first-time MT5634ZLX installation, click Network icon in Control Panel of the Main Group to add the desired Protocols, Client and Service. Reboot the computer; the card is now fully functional. Artisoft Lantastic 6.0 Installation Install LANTASTIC 6.0 first.

  • Page 31: Chapter 3 - Comprehensive Driver Notes Introduction

    MT5634ZLX software drivers, as well as specific information on the NDIS, Packet Driver, and Windows for Workgroups drivers. Factory Default Settings The MT5634ZLX was shipped from the factory with the following default settings: Modem COM Port COM3 , IRQ5 LAN IRQ Level LAN I/O Base Addr.
  • Page 32 Phoenix DEVICE=C:\PCMPLUS\PCMSCD.EXE If one of these lines exists in your CONFIG.SYS, it can be used to enable the MT5634ZLX PC Card. Follow the PCMCIA driver installation instructions in the PC’s manual. If the PC Card drivers do not support multi-function cards, use the Multi-Tech supplied enabler.

  • Page 33: Getting Started

    3 - Comprehensive Driver Notes Getting Started For Novell, Lan Manager, and Packet Driver, first insert the MT5634ZLX PC Card into an open PCMCIA card slot, and remove all other PC Cards from your computer. Insert the MT5634ZLX driver disk into Drive A and type A:\INSTALL at the command prompt.

  • Page 34: Driver Directory Structure

    Databook controllers. LM28ODI.COM MT5634ZLX DOS/ODI Driver working with direct enabler (LAN & MODEM run concurrently). Supports Intel compatible, Compaq and Databook controllers. LM28NDS.DOS MT5634ZLX DOS real mode NDIS Driver. LM28PD.COM MT5634ZLX DOS real mode Packet Driver. LM28NDS.386 MT5634ZLX Enhanced Mode NDIS Driver for Windows for Workgroups.

  • Page 35: Driver Upgrades

    If using the downloaded drivers does not get the MT5634ZLX working properly, our technical experts are always ready to help. Please be at your computer, have your MT5634ZLX, Driver Disk, and the following information available: • Version number of CARDEN.EXE and any drivers you are running, •...

  • Page 36: Notes For Ndis Driver

    MT5634ZLX Owner’s Manual Notes for NDIS Driver The following are examples of partial CONFIG.SYS and AUTOEXEC.BAT files for loading System Soft‘s Card Services and NDIS2 driver: Example of partial CONFIG.SYS file: device=c:\cardsoft \ss365sl.exe device=c:\cardsoft \cs.exe device=c:\cardsoft \csalloc.exe c:\cardsoft\csalloc.ini device=c:\lanman.dos\drivers\ethernet\lm28\carden.exe /iop=nnn /irq=n /com=n /mir=n device=c:\cardsoft \cardid.exe...

  • Page 37: Notes For Packet Driver

    3 - Comprehensive Driver Notes IOADDRESS - value where value is one of the following addresses: 0x300, 0x320, 0x340, 0x360. (The leading 0x for the hex notation is required.) (To have Card Services select the address base from it’s pool of available addresses, use a value of 0 .) INTERRUPT - value where values is one of the following interrupts:...

  • Page 38: Notes For Windows For Workgroups

    MT5634ZLX Owner’s Manual Notes for Windows For Workgroups After installation of the MT5634ZLX drivers, the system will automatically update the CONFIG.SYS and AUTOEXEC.BAT files so that the driver will be loaded at system startup. When modifying the two files, the system will make a dual copy named CONFIG.ABO and AUTOEXEC.ABO in the system’s...

  • Page 39: Chapter 4 - Troubleshooting

    Below are a number of examples of Problems (listed in bold:), Causes (C:), and Solutions (S:). If your MT5634ZLX is not working properly, look up the problem and solution here; if unsuccessful, call Tech Support (see Chapter 5). At the end of this chapter is some specific steps for resolving IRQ and COM port conflicts.

  • Page 40: The Modem Does Not Give A Response After An At Command Was Executed

    MT5634ZLX Owner’s Manual The Modem Does Not Give a Response After an AT Command Was Executed C: The echo and/or responses may be turned off by the ATE0Q1 commands. Enable the AT&V1 to check Result Codes. Use ATE1Q0 then Enter to change them back.

  • Page 41: The Software Does Not Control The Modem Properly Or Can Not Detect The Modem

    4 - Troubleshooting The Software Does Not Control the Modem Properly or Can Not Detect the Modem Make sure the software has been set up correctly. Check the initialization string and dial string. C: Some TSRs (programs that stay in memory after they are loaded) may conflict with the communications software.

  • Page 42: The Modem Does Not Dial A Phone Number After Execution Of At Dial Command

    MT5634ZLX Owner’s Manual The Modem Does Not Dial a Phone Number After Execution of AT Dial Command C: If you are using touch tone dialing on a phone line that requires pulse dialing, then it may not work. Use ATDT in place of ATDP .

  • Page 43: The Modem Loses The Connection When In Use

    4 - Troubleshooting The Modem Loses the Connection When in Use C: The remote modem may have locked up. Run the Remote Digital Loopback Test ( &T4 command). C: The telephone switch may have disconnected your call. C: Your software may have turned off the DTR signal.

  • Page 44: After Downloading A File, The File Does Not Store On Your Disk Drive

    MT5634ZLX Owner’s Manual After Downloading a File, the File Does Not Store on Your Disk Drive C: If both modems are using MNP or V.42 protocol, then flow control may not be enabled. Configure your software to use RTS/CTS flow control to cause your computer to pause long enough for the file to be stored to disk.

  • Page 45: When Connecting To Another Modem, The Modem Reports A Higher Connect Baud Rate Than It Is Really Using

    Reserve D000 - D3FF for attribute memory. C: No free I/O space or interrupt request can be assigned to the MT5634ZLX. The MT5634ZLX needs 32 contiguous I/O ports and one interrupt request for its LAN connection. It also need 8 contiguous I/O ports and another interrupt request for Fax/Modem.

  • Page 46: Enabling The Mt5634Zlx

    9. Insert the card again. 10. Follow the instruction to insert the diskette and type the path A:\ for the MT5634ZLX driver. 11. Add client and service as desired at the Network icon in Control Panel. 12. Reboot the computer.

  • Page 47: The Netware Driver Runs Successfully But Fails To Login To The Netware Server

    4 - Troubleshooting The NetWare Driver Runs Successfully but Fails to Login to The NetWare Server C: The client Frame type is incompatiable with the server Frame type. The default frame type for Netware 3.11 and below is 802.3 but it changed to 802.2 in Netware 4.x and 3.12.

  • Page 48: Windows 95

    MT5634ZLX Owner’s Manual Windows 95 In Windows 95, right-click on My Computer , select Properties from the menu, click on the Device Manager tab, double-click on Ports , then double- click on the Communications Port your modem is connected to. In the port’s Properties sheet, click on the Resources tab to see the port’s Input/Output...

  • Page 49: Chapter 5 - Service

    5 - Service Chapter 5 - Service This chapter begins with the terms of your modem’s warranty. Read carefully the next section, Tech Support, if you have questions or problems with your modem. It includes the technical support telephone numbers and an explanation of how to send in your modem should you require service.

  • Page 50: On-Line Warranty Registration

    To register your Multi-Tech product on-line, click on the following link: http://www.multitech.com/support/register.htm Software User License Agreement The MT5634ZLX software is licensed by Multi-Tech Systems, Inc. to the original end-user purchaser of the product, hereafter referred to as “licensee”. The License includes the distribution diskette, other accompanying programs, and the documentation.
  • Page 51 5 - Service The Software is furnished to the Licensee for execution and use on a single computer system only and may be copied (with the inclusion of the Multi- Tech Systems, Inc. copyright notice) only for use on that computer system. The Licensee hereby agrees not to provide or otherwise make available any portion of this software in any form to any third party without the prior express written approval of Multi-...

  • Page 52: Tech Support

    MT5634ZLX Owner’s Manual Tech Support Multi-Tech has an excellent staff of technical support personnel available to help you get the most out of your Multi-Tech product. If you have any questions about the operation of your Multi-Tech modem, please call 1-800-972-2439. Please fill in the modem information form (below), and have it available when you call.

  • Page 53: Service

    5 - Service Before calling Tech Support, please check your cables to ensure they are connected properly; then note the status of your modem including status indicators, screen messages, diagnostic test results, problems with a specific application, etc. Service If your tech support specialist decides that service is required, you may send your modem to our factory (freight prepaid).

  • Page 54: About The Multi-Tech Bbs

    MT5634ZLX Owner’s Manual About the Multi-Tech BBS Multi-Tech Systems maintains a bulletin board system (BBS) for its customers. The information available via the BBS includes new product information, product upgrade data, problem-solving tips, and a message service you can use to request additional information.

  • Page 55: About Compuserve/Internet

    About CompuServe/Internet In addition to the BBS, Multi-Tech provides support through CompuServe’s Modem Vendor Forum (GO MODEMVEN) under GO MULTITECH. You can download manuals, Help files, drivers, ARA and Microsoft Mail scripts, and product descriptions from Multi-Tech’s forum library. Please refer to your CompuServe documentation for special operating procedures.

  • Page 56: About The Multi-Tech Fax-Back System

    MT5634ZLX Owner’s Manual About the Multi-Tech Fax-Back System Multi-Tech’s fax-back system provides 24-hour access to sales/marketing and technical literature. Dial (612) 717-5888, follow the voice prompts, and enter the document number for either the “Sales and Marketing” catalog or the “Technical Support”...

  • Page 57: Appendix A - Specifications

    Appendices Appendix A - Specifications Data: • V.34bis 33.6K bps, V.34 28.8K bps, V.32bis 14.4K bps • AT Command Set Compatible • V.42bis & MNP 5 Data Compression • V.42 & MNP 2-4 Error Correction • Enhanced Throughput Cellular (ETC) protocol for mobile cellular connection Fax: •...

  • Page 58: Appendix B - At Commands, S-Registers & Result Codes

    MT5634ZLX Owner’s Manual Appendix B - AT Commands, S-Registers & Result Codes Introduction This chapter describes how to use MT5634ZLX AT commands, S-Registers and Result Codes. How To Use AT Commands Usually, your fax and data comm software controls the modem for you. However, you may also want to use the AT commands.
  • Page 59 Appendices For example, type: ATH0<Enter> to hang up the modem connection, AT&K3<Enter> to enable bi-directional CTS/RTS hardware flow control. Most of the AT commands can be entered in “strings” (i.e., on the same command line) without spaces between the individual commands. For example: AT&K3H0<Enter>...

  • Page 60: Basic At Commands

    MT5634ZLX Owner’s Manual Basic AT Commands Command Options Function & Description Re-execute the last command string <any key> Terminate the current connection attempt when entered in handshaking state All the following commands require an “AT” prefix Go off-hook and attempt to establish a...
  • Page 61 Appendices Command Options Function & Description Wait for second dial tone. The modem waits for the second dial tone before processing the dial string Pause. Cause the modem to pause for a time before processing the dial string (designed by S8 register) Flash hook (for call transfer).
  • Page 62 MT5634ZLX Owner’s Manual Command Options Function & Description When originating or answering, start handshaking only at the communication standard specified by S37 register and “ATBn” During handshake, fallback to a lower speed may occur except in “AT\N1” mode Go on-line...
  • Page 63 Appendices Command Options Function & Description Display CONNECT or “1” for all speeds Display connect message according to “ATW” and “AT\V”, blind dial, ignore busy tone Display connect message according to “ATW” and “AT\V”, wait for dial tone, ignore busy tone Display connect message according to “ATW”...

  • Page 64: At& (Ampersand) Commands

    MT5634ZLX Owner’s Manual AT& (Ampersand) Commands Command Options Function & Description &Bn Auto-retrain &B0 Hang up on a poor received signal &B1 * Retrain on a poor received signal. Hang up if condition persists longer than the threshold set in S7 register &B2...
  • Page 65 Appendices Command Options Function & Description &Kn Set flow control &K0 Disable flow control &K3 * Enable bi-directional hardware flow control (CTS/RTS) &K4 Enable bi-directional software flow control (XON/XOFF) &Mn Sync, Async, or AutoSync mode selection &M0 * Async mode &M4 Hayes AutoSync mode &Pn...
  • Page 66 MT5634ZLX Owner’s Manual Command Options Function & Description &T5 Deny request from remote for RDL test &T6 Remote digital loopback test &T7 Remote digital loopback with self-test &T8 Local analog loopback with self-test &Vn View active configuration and stored profile &V0...

  • Page 67: At% (Percent) Commands

    Appendices AT% (Percent) Commands Command Options Function & Description Set auto-reliable fallback character n=1-127 Specify the ASCII character that tells the modem to return (or fallback) from auto-reliable (MNP) mode to a normal connection on the answering modem Data compression option No compression %C1 * MNP 5 compression...
  • Page 68 MT5634ZLX Owner’s Manual Command Options Function & Description Set modem port flow control \G0 * Disable port flow control Set port flow control to XON/XOFF Constant DTE speed option \J0 * DCE and DTE rates are independent DTE rate adjusts to DCE connection...
  • Page 69 Appendices Command Options Function & Description In on-line command state with V.42 protocol or normal mode, and the DTE issues a transmit break command n=0 or 1 Empty the data buffers and send the break to the remote modem n=2 or 3 Send break to the remote modem immediately n=4 or 5...
  • Page 70 MT5634ZLX Owner’s Manual Command Options Function & Description Disable flow control XON/XOFF software flow control CTS flow control to DTE RTS/CTS hardware flow control Set inactive timer n=0 * Disable inactive timer n=1 - 90 Enable inactive timer. Length in...

  • Page 71: At- (Dash) Commands

    Appendices AT- (Dash) Commands Command Options Function & Description Set V.42 detection phase Disable V.42 detection phase -J1 * Enable V.42 detection phase Display firmware version number “Hn V.42bis compression control “H0 Disable V.42bis “H1 Enable V.42bis only when transmitting data “H2 Enable V.42bis only when receiving...

  • Page 72: S-Registers (Atsn=X)

    MT5634ZLX Owner’s Manual S-Registers (ATSn=x) Certain modem parameters are stored in memory locations called S-Registers. Use the S command to read or alter the contents of S-Registers. S0= 0-255 S0 sets the number of the rings required before the modem automatically answers a call. Set “S0=0” to disable auto-answer mode.
  • Page 73 Appendices S4= 0-127 S4 holds the decimal value of the character recognized as a line feed (asynchronous operation only). The line feed control character is output after the carriage return control character, if verbose result codes are enabled. The factory default is 010. S5= 0-127 S5 holds the decimal value of the character recognized as a backspace (asynchronous...
  • Page 74 MT5634ZLX Owner’s Manual S9=1-255 S9 sets the time, in tenths of a second, that the carrier must be present before the modem considers it valid and turns on RLSD. The factory default is 006. S10=1-255 S10 sets the length of time, in tenths of a second, that the modem waits before hanging up after a loss of carrier.
  • Page 75 Appendices S30=0-90 S30 controls the Inactivity timer, which sets the length of time, in minutes, that the modem counts when there is no data flow in or out the DTE serial port. A connection is disengaged when the counter reaches the preset value. Setting to S30 =0 disables the inactivity timer.

  • Page 76: Result Codes

    38400 bps 57600 bps 115200 bps Result Codes In Command mode, the MT5634ZLX can send information and status responses, or Result Codes, to your computer. Result Codes are used by communications programs and can also appear on your monitor. The form of the Result Code information displayed can be defined using the Qn , Vn , Wn and Xn commands.

  • Page 77: Basic Result Codes

    Appendices Basic Result Codes ATW0: report DTE rate Example: CONNECT 57600 ATW2: report DCE rate Example: CONNECT 28800 AT\V1: report connection protocol CONNECT DTE_or_DCE_speed connection_protocol Example: CONNECT 57600/NONE for normal mode connection CONNECT 28800/MNP for MNP connection CONNECT 115200/LAP-M for V.42 LAPM connection ATV0 ATV1...

  • Page 78: Extended Result Codes

    MT5634ZLX Owner’s Manual Extended Result Codes ATW1: report DCE & DTE speed and enable extended result code Example: CARRIER DCE_speed PROTOCOL: connection_protocol (MNP 2, 3, 4 or LAP-M) COMPRESSION: compression_protocol (MNP 5 or V.42bis) CONNECT DTE_speed (see “Basic Result Code Options Table”)

  • Page 79: Appendix C - Regulatory Agency Information

    Appendices Appendix C - Regulatory Agency Information FCC Regulatory Statements Consumer Instructions 1. This equipment complies with part 68 of the Federal Communications Commission Rules. On the outside surface of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN).
  • Page 80 MT5634ZLX Owner’s Manual 5. If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company will notify the customer as soon as possible.
  • Page 81 Appendices Manufacturer: Multi-Tech Systems, Inc. Trade Name: MultiMobile Model Number: MT5634ZLX and MT5634ZLX/E FCC Registration #: AU7USA-31371-MM-E Ringer Equivalence: 0.7B Modular Jack (USOC): RJ11C or RJ11W (single line) Service Center in USA: Multi-Tech Systems, Inc. 2205 Woodale Drive Mounds View, MN 55112...

  • Page 82: Fcc Fax Update

    MT5634ZLX Owner’s Manual Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC rules.

  • Page 83: Canadian Limitations Notice

    Appendices Canadian Limitations Notice Notice: The ringer equivalence number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination of a interface may consist of any combination of devices subject only to the requirement that the sum of the ringer equivalence numbers of all the devices does not exceed 5.
  • Page 84 MT5634ZLX Owner’s Manual Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.

  • Page 85: Index

    Index Index About This Manual ........7 About This Product ........7 Ampersand Commands ......64 Artisoft Lantastic 6.0 Installation ....30 AT Commands, S-Registers and Result Codes ............58 Auto-answer ........40, 72 Back Slash Commands ...... 67, 68 Backspace character .........
  • Page 86 MT5634ZLX Owner’s Manual Dash Commands ........71 Data Rates (bps) ........10 Data Specifications ........57 Desired DCE speed ........75 Dimensions ..........9 DOS Extended Memory Managers ... 33 Driver Directory Structure ......34 Driver Installation Screen ......17 Driver Software Installation .......
  • Page 87 Index Inactivity timer ........... 75 Incoming rings ........... 72 Installation .......... 14, 31 Installing The MT3410ZLX Card ....14 Installing The MT5610ZLX or MT5610ZLX-T/2 Card(s) ......14 Introduction and Description ....7, 39 K56flex speeds .......... 10 Line feed character ........73 Loss of carrier setting ........
  • Page 88 MT5634ZLX Owner’s Manual NDIS Driver ..........36 NDIS2 Driver for Workgroup ..... 25 NDIS3 Driver for Workgroup ..... 23 NetWare driver/NetWare Server ....47 Network ............9 NOS Selection Screen ......16 Novell Client Installation ......19 Novell NetWare Installation ....... 16 ODI Driver for Workgroups ......
  • Page 89 Index S-Registers ..........72 Safety Warnings ......... 14, 22 Service ............53 Ship Kit Contents ........13 Software Installation ........16 software problem ........41 Software User License Agreement .... 50 Specifications ........9, 57 Technical support ....52, 53, 54, 55 Transmitting power level adjustment ..

This manual is also suitable for:

EE-t2Multimobile mt5634zlx/eMultimobile mt5634zlx/e-t/2

Table of Contents