Multitech MultiMobile MT5634ZLX/FE User Manual page 14

Changing the Remote Escape Character
To further improve security, you can change a remote modem's remote configuration escape character.
The remote configuration escape character is stored in register S9. The factory default is 37, which is the
ASCII code for the percent character (%). Setting S9 to 0 (zero) disables remote configuration entirely.
Caution: If you do this remotely, you won't be able to change it back remotely!
1. Establish a remote configuration link with the remote modem as described in
2. Note: This command can be executed locally as well as remotely.
3. Type where n is the ASCII code for the new remote configuration escape character, then
ATS9=n,
press .
Enter
4. Save the new value by typing
5. Type and press
ATO
MT5634ZLX, MT5634ZLXI, MT5634ZLX/FE User Guide
and pressing
AT&W
to exit remote configuration.
Enter
Chapter 3 – Remote Configuration
Enter.
Basic Procedure.
14