MT2834ZPX Owner's Manual
COMMAND:
Xn
VALUES:
n = 0, 1, 2, 3 or 4
DEFAULT:
X0
DESCRIPTION :
X0 selects Basic Result Codes (w/o CONNECT 1200,
X1 selects Extended Result Codes (w/CONNECT 1200,
X2 selects Standard AT Command set with NO DIAL
COMMAND:
#Xn
VALUES:
n = 0 or 1
DEFAULT:
#X0
DESCRIPTION :
#X0 selects single XOFF character sent until XON level
#X1 selects multiple XOFF characters after buffer level is
COMMAND:
Yn
VALUES:
n = 0 or 1
DEFAULT:
Y0
DESCRIPTION :
Y0 disables sending or responding to long space "break".
Y1 enables sending or responding to long space "breaks".
COMMAND:
Z
VALUES:
n/a
DEFAULT:
n/a
DESCRIPTION :
All configuration parameters are reset to default values.
COMMAND:
, (Comma)
VALUES:
n/a
DEFAULT:
n/a
DESCRIPTION :
Causes pause during dialing.
36
CONNECT 2400).
CONNECT 2400).
TONE.
X3 selects Standard AT Command set with BUSY.
X4 selects Standard AT Command set with NO DIAL
TONE and BUSY.
returns.
full.