Adjusting Armrest Height - Invacare Tracer SX5 Owner's Operator And Maintenance Manual

Armrest
Rear Tube

Adjusting Armrest Height

WARNING
Make sure the height adjustment lever
is in the locked position before using the
wheelchair.
NOTE: For this procedure, refer to
FIGURE 5.2.
1. Unlock the armrest by flipping the
height adjustment lever on the top
front of the armrest to the up
(horizontal) position.
2. Adjust armrest to one of five positions.
NOTE: Height adjustment lever MUST be in
the unlocked position when placing armrest
into the arm assembly.
3. Lock the armrest by pressing the height adjustment lever into the down (vertical)
position when the desired armrest height is achieved.
4. Repeat STEPS 1-3 for other armrest.
Part No. 1110550
Armrest Mounting Bracket
Armrest
Rear Tube
Nut
FIGURE 5.1 Using or Replacing Flip-Back Armrest
Armrest Release
Button
(Front or Back of the
Armrest Front Tube)
Armrest
Front Tube
Arm Socket
Hex
Screw
Spacer
Locked (Vertical)
Unlocked (Horizontal)
FIGURE 5.2 Adjusting Armrest Height
31
Arms
Inside
of Chair
Height
Adjustment
Armrest
Lever
®
Tracer SX5